ADV Base (PosiTector Advanced models - Serial Numbers: 864,000 and greater)
| Revision | Release Date | Release Notes |
| 8.05.113 | 24-Oct-2024 | - Added support for new PosiTest AT Calibrator probe - Miscellaneous updates and fixes |
| 8.05.112 | 4-Aug-2024 | - Fixed an issue that could cause the Zero operation to fail with PosiTector RTR, PosiTector BHI and PosiTector SHD probes. - Miscellaneous updates and fixes |
| 8.05.111 | 25-Jul-2024 | - Added menu selection for Testex Press-O-Film Coarse Minus for PosiTector RTR H and PosiTector RTR 3D probes. - Miscellaneous updates and fixes |
| 8.05.110 | 9-Jul-2024 | - Miscellaneous updates and fixes for PosiTector DPM and PosiTector UTG probes. |
| 8.05.108 | 31-Jan-2024 | - Miscellaneous fixes/updates for PosiTector UTG, PosiTector GLS, and PosiTector DPM L instruments |
| 8.05.106 | 13-Nov-2023 | - PosiTector DPM probes: Resolved issue that prevented WiFi synchronization of datasets to PosiSoft.net when Auto Logging with batteries |
| 8.05.105 | 14-Sept-2023 | - PosiTector 6000 FNDS probes: Fixed possible batch display issue when storing duplex measurements in ISO 19840 mode |
| 8.05.104 | 5-Sept-2023 | - PosiTector 6000, PosiTector 200: Fixed issue with Prompted Batch Mode measurements when probe held on surface for repeated measurements - PosiTector RTR 3D: Miscellaneous fixes - Miscellaneous updates and fixes |
| 8.05.101 | 23-Jan-2023 | - PosiTector DPM: Alarm Temperature values can now be set over 100 - PosiTector UTG: Added Calibration Memory for storing additional materials - Miscellaneous updates and fixes |
| 8.05.99 | 8-Nov-2022 | - PosiTector 6000: Added Strip Chart mode to Statistics mode. Press Up button when in Statistics mode to display Strip Chart. - Fixed issue with enabling Memory when the clock is not set - Added ability to disable audible reading tone (after successful measurement has been taken) -Added new NMEA streaming format for USB Streaming - Added AZERTY Keyboard Layout option for on-screen keyboard - Miscellaneous updates and fixes |
| 8.05.98 | 20-Oct-2022 | - PosiTector RTR 3D probes: Added support for PosiTector RTR 3D probes with serial numbers greater than 1031196 - PosiTector SST probes: Increased maximum measurement range to 1700 μS/cm -Added new NMEA streaming format for USB Streaming - Added AZERTY Keyboard Layout option for on-screen keyboard - Miscellaneous updates and fixes |
| 8.05.97 | 14-Sept-2022 | - Calibration adjustment information will now be reported when downloading measurements to PosiSoft - PosiTector UTG P probes: Added Inch to the unit options - Added Bluetooth classic support for Keyboard/Scanner input - Miscellaneous updates and fixes |
| 8.05.95 | 05-May-2022 | - Added Reading Annotation support–add notes for each stored measurement using on screen keyboard, wireless Bluetooth BLE barcode scanner or keyboard - Added support for Bluetooth BLE Barcode scanners and Keyboards—enter batch and reading annotations with ease - Added user-selectable delimiter option for USB/Bluetooth Keyboard modes - Miscellaneous updates and fixes |
| 8.05.94 | 24-Mar-2022 | - PosiTector 6000 probes: WiFi Streaming now includes statistics when using Statistics Scan - Fixed PosiTector GLS sync issue with PosiSoft.net - Miscellaneous updates and fixes |
| 8.05.93 | 14-Mar-2022 | - Added support for PosiTector GLS Gloss Meter probes - Cal Lock ON/OFF state remains unchanged when a menu reset is performed - Miscellaneous updates and fixes |
| 8.05.90 | 10-Jan-2022 | - Added support for Calibration Adjustment reporting for PosiSoft Desktop reports (requires PosiSoft Desktop v4.9.0+) |
| 8.05.89 | 20-Dec-2021 | - PosiTector 200: Added support for SSPC PA9 - PosiTector 200: Added support for storing multiple calibration adjustments - PosiTector DPM L: Optimized downloading of large data logs from DPM L Smart Probe - Miscellaneous updates and fixes |
| 8.05.86 | 21-Jul-2021 | - PosiTector UTG: Added support for Prompted Batches - PosiTector RTR 3D: Increased SDF (Surface Data File) storage from 1 to 10 files - Miscellaneous updates and fixes |
| 8.05.85 | 14-Jun-2021 | - PosiTector UTG C/CA/CX probes: Added Sensitivity adjustment feature - Miscellaneous updates and fixes |
| 8.05.84 | 7-Jun-2021 | - PosiTector 6000 probes: Fix issue where creating a prompted batch without an image could cause gage to power down - Miscellaneous updates and fixes |
| 8.05.82 | 20-Apr-2021 | - PosiTector 200: Added support for Prompted Batches - Miscellaneous updates and fixes |
| 8.05.81 | 8-Mar-2021 | - Added Turkish support for On-Gage help - Added Vietnamese support for Gage menu - Miscellaneous updates and fixes |
| 8.05.80 | 16-Feb-2021 | - Added Italian language support for On-Gage Help - Miscellaneous updates and fixes |
| 8.05.79 | 10-Feb-2021 | - Miscellaneous updates and fixes |
| 8.05.78 | 5-Feb-2021 | - Miscellaneous updates and fixes |
| 8.05.77 | 23-Jan-2021 | - Added Histogram to the batch view options - Added user selectable power off time feature when connected via BLE Bluetooth Smart - Miscellaneous updates and fixes |
ADV Base (PosiTector Advanced models - Serial Numbers: 784,000 to 864,000)
| Revision | Release Date | Release Notes |
| 7.04.61 | 3-Aug-2020 | - PosiTector RTR 3D probes: Now allows readings above 9999 for Spd 1/in2 - Miscellaneous updates and fixes |
| 7.04.59 | 8-Feb-2020 | - Fixed truncated interface which could occur when returning from Smart Probe menu - Miscellaneous updates and fixes |
| 7.04.58 | 20-Jan-2020 | - Added Network Transfer Protocol for auto updating timezone for daylight savings time - Miscellaneous updates and fixes |
| 7.04.56 | 4-Dec-2019 | - Added support for new PosiTector DPM L probe |
| 7.04.55 | 21-Oct-2019 | - Added ability to change default Access Point IP Address |
| 7.04.54 | 26-Aug-2019 | - IP addresses can now use DNS name - Miscellaneous updates and fixes |
| 7.04.53 | 13-Aug-2019 | - Added ability to enter special characters in WiFi password field - Miscellaneous updates and fixes |
| 7.04.52 | 12-Aug-2019 | - Added support for Prompted Batch Mode - Miscellaneous updates and fixes |
| 7.04.50 | 8-Jul-2019 | - Updated keyboard for FTP Address field - Miscellaneous updates and fixes |
| 7.04.49 | 25-Jun-2019 | - Added support for PosiTector UTG-P, UTG-CA, UTG-CLF probes - Miscellaneous updates and fixes |
| 7.04.48 | 22-May-2019 | - Added WiFi Streaming support - Miscellaneous updates and fixes |
| 7.04.47 | 28-Feb-2019 | - Increased Peak Count maximum to 99,999/in2 for PosiTector RTR 3D and PosiTector RTR P probes |
| 7.04.46 | 23-Jan-2019 | - Increased maximum measurement range for PosiTector 6000 FXS probe to 2000 microns (80 mils) - Miscellaneous updates and fixes |
| 7.04.44 | 7-Jan-2019 | - Miscellaneous updates and fixes |
| 7.04.43 | 2-Jan-2019 | - Added support for PosiTector UTG M probes with serial number 355,874+ |
| 7.04.42 | 12-Nov-2018 | - Added support for gage firmware update when connected to PosiSoft Desktop version 4.4.1 or greater |
| 7.04.41 | 30-Oct-2018 | - Added Max Thick Mode for PosiTector 200 probes - ideal when only total thickness of a coating sytem is required |
| 7.04.40 | 27-Sep-2018 | - Added additional USB stream functions for PosiTector UTG probes |
| 7.04.39 | 20-Sep-2018 | - Improved performance for PosiTector 6000 FNDS probe on small diameter parts and when a Zn Zero is required |
| 7.04.38 | 7-Aug-2018 | - Fixed issue which may cause gage to power off when connecting PosiTector PC probes - Miscellaneous updates and fixes |
| 7.04.37 | 19-July-2018 | - Added USB serial stream mode for PosiTector UTG M and PosiTector SPG probes - PosiTector PC: fixed issue which may cause gage to power off when in memory mode - Miscellaneous updates and fixes |
| 7.04.36 | 11-June-2018 | - Added support for PosiTector BHI Barcol Hardness Impressor - Added Zero control to USB to Serial API |
| 7.04.34 | 15-Mar-2018 | - Date/time now displays within PosiTector main menu - Added adjustment for temperature emissivity - PosiTector DPM IR probes - Miscellaneous updates and fixes |
| 7.04.33 | 5-Mar-2018 | - Added support for PosiTector DPM IR probe - Miscellaneous updates and fixes |
| 7.04.32 | 22-Feb-2018 | - Fixed issues which could cause gage to become unresponsive when pairing a PosiTector PC probe |
| 7.04.31 | 13-Feb-2018 | - Increased adjustment range for PosiTector 200 probes - Misc. fixes/updates |
| 7.04.29 | 30-Jan-2018 | - Misc. fixes/updates |
| 7.04.28 | 15-Jan-2018 | - Added support for 64 bit WiFi passwords - Misc. fixes/updates |
| 7.04.26 | 16-Nov-2017 | - Added keyboard stream mode - Miscellaneous updates and fixes |
| 7.04.23 | 20-Jul-2017 | - Added support for PosiTector SPG TS concrete profile probe - Miscellaneous updates and fixes |
| 7.04.20 | 28-Mar-2017 | - Miscellaneous updates and fixes |
| 7.04.18 | 28-Mar-2017 | - Added support for PosiTector DPMA and PosiTector DPMD probes |
| 7.04.16 | 7-Dec-2016 | - Added live transfer (stream) of readings over USB. For applications supporting serial capture - Removed Black on White display mode - Miscellaneous updates and fixes NOTE: This release may consist of (2) updates and may require repeating the update process twice. The first upgrades the gages update software, the second installs the latest revision. |
| 7.04.15 | 21-Nov-2016 | - PosiTector DPM: Fixed erroneous memory full error when connected via USB for extended period of time (in Auto Log mode) |
| 7.04.13 | 11-Oct-2016 | - Miscellaneous updates and fixes relating to PosiTector UTG/SHD |
| 7.04.12 | 28-Sept-2016 | - Added language translations to support PosiTector SST Soluble Salt Tester |
| 7.04.11 | 22-Sept-2016 | - Added support for PosiTector SST Soluble Salt Tester probe - PosiTector 6000 FNDS now allows storage of measurement with no Zinc present - PosiTector DPM: wet bulb temperature (Tw) now saved in memory - PosiTector DPM: added Auto Sync to WiFi menu - Miscellaneous updates and fixes |
| 7.04.09 | 17-Aug-2016 | - Fixed issue with PosiTector 6000 FNDS probe data importing into PosiSoft |
| 7.04.07 | 23-June-2016 | - Miscellaneous updates and fixes |
| 7.04.06 | 08-June-2016 | - Added support for PosiTector SHD Shore Hardness Durometer - Miscellaneous updates and fixes |
| 7.00.03 | 17-May-2016 | - Miscellaneous fixes/updates - Added support for PosiTector 6000 FNDS probe |
| 7.00.02 | 03-May-2016 | -Added BLE (Bluetooth Low Energy) support for communication with smart devices (PosiTector App) -Updated menu navigation -Miscellaneous fixes/updates |
| 7.00.01 | 08-Feb-2016 | - Initial release |
ADV Base (PosiTector Advanced models - Serial Numbers: 730,000 to 784,000)
| Revision | Release Date | Release Notes |
| 7.04.49 | 25-Jun-2019 | - Added support for PosiTector UTG-P, UTG-CA, UTG-CLF probes - Miscellaneous updates and fixes |
| 7.04.48 | 22-May-2019 | - Added WiFi Streaming support - Miscellaneous updates and fixes |
7.02.46 | 23-Jan-2019 | - Increased maximum measurement range for PosiTector 6000 FXS probe to 2000 microns (80 mils) - Miscellaneous updates and fixes |
| 7.02.44 | 7-Jan-2019 | - Miscellaneous updates and fixes |
| 7.02.43 | 2-Jan-2019 | - Added support for PosiTector UTG M probes with serial number 355,874+ |
| 7.02.39 | 20-Sep-2018 | - Improved performance for PosiTector 6000 FNDS probe on small diameter parts and when a Zn Zero is required |
| 7.02.38 | 7-Aug-2018 | - Fixed issue which may cause gage to power off when connecting PosiTector PC probes - Miscellaneous updates and fixes |
| 7.02.37 | 19-July-2018 | - Added USB serial stream mode for PosiTector UTG M and PosiTector SPG probes - PosiTector PC: fixed issue which may cause gage to power off when in memory mode - Miscellaneous updates and fixes |
| 7.02.36 | 11-June-2018 | - Added support for PosiTector BHI Barcol Hardness Impressor - Added Zero control to USB to Serial API |
| 7.02.34 | 15-Mar-2018 | - Date/time now displays within PosiTector main menu - Added adjustment for temperature emissivity - PosiTector DPM IR probes - Miscellaneous updates and fixes |
| 7.02.33 | 5-Mar-2018 | - Added support for PosiTector DPM IR probe - Miscellaneous updates and fixes |
| 7.02.23 | 20-Jul-2017 | -
Added support for PosiTector SPG TS concrete profile probe - Miscellaneous updates and fixes |
| 7.04.20 | 27-Apr-2017 | - Miscellaneous updates and fixes |
| 7.02.15 | 21-Nov-2016 | -
PosiTector DPM: Fixed erroneous memory full error when connected via USB for extended period of time (in Auto Log mode)
NOTE: This release may consist of (2) updates and may require repeating the update process twice. The first upgrades the gages update software, the second installs the latest revision. |
| 7.02.13 | 11-Oct-2016 | - Miscellaneous updates and fixes relating to PosiTector UTG/SHD |
| 7.02.12 | 28-Sept-2016 | - Added language translations to support PosiTector SST Soluble Salt Tester |
| 7.02.11 | 22-Sept-2016 | -
Added support for PosiTector SST Soluble Salt Tester probe - PosiTector 6000 FNDS now allows storage of measurement with no Zinc present - PosiTector DPM: wet bulb temperature (Tw) now saved in memory - PosiTector DPM: added Auto Sync to WiFi menu - Miscellaneous updates and fixes |
| 7.02.09 | 17-August-2016 | - Fixed issue with PosiTector 6000 FNDS probe data importing into PosiSoft
|
| 7.02.06 | 08-June-2016 | - Added support for PosiTector SHD Shore Hardness Durometer |
| 7.02.04 | 01-June-2016 | - Miscellaneous fixes/updates - Added support for PosiTector 6000 FNDS probe
|
| 5.17.00 | 17-May-2016 | -Miscellaneous updates/fixes
|
| 5.16.00 | 03-May-2016 | -Miscellaneous updates/fixes
|
| 5.15.00 | 04-Jan-2016 | -Miscellaneous updates -Added wet bulb temperature to JSON file
|
| 5.14.00 | 01-Apr-2015 | -Added support for PosiTector RTR-P probe |
| 5.13.00 | 24-Feb-2015 | -Added support for PosiTector SPG-CS probe |
| 5.12.00 | 17-Feb-2015 | --Miscellaneous fixes/updates |
| 5.11.00 | 26-Jan-2015 | --Added support to display millimeter (mm) for PosiTector 6000 FT/FTS/FNTS probes |
| 5.10.00 | 26-Jan-2015 | --Added support for PosiTector 6000 FXS Xtreme™ probe |
| 5.08.00 | 29-May-2014 | Advanced models with serial numbers greater than 730,000 only: |
| 5.06.00 | 01-May-2014 | -Fixed issue where PosiTector may not be found in PosiSoft 3.0 & PosiSoft Mobile when connected via WiFi -Miscellaneous fixes/updates |
| 5.05.00 | 17-Mar-2014 | -Added support for PC (powder checker) probes -Miscellaneous fixes/updates |
| 5.01.00 | 19-Dec-2013 | New probe interchangeability features... -Hot Swap - change probes without powering down the instrument -Probe Settings Retention: PosiTector remembers the stored settings of each probe that was attached |
| 5.00.00 | 30-Oct-2013 | -Added support for RTR (replica tape reader) probes |
| 4.00.16 | 23-July-2013 | -Miscellaneous fixes/updates (UTG probes) |
| 4.00.14 | 10-July-2013 | -Miscellaneous fixes/updates (6000 probes) |
| 4.00.11 | 10-May-2013 | -Added support for 6000 FNGS probe -Fixed displayed range in Gage Info (200 probes only) -Miscellaneous fixes/updates |
| 4.00.09 | 07-Jan-2013 | -Miscellaneous fixes/updates |
| 4.00.08 | 12-Dec-2012 | -Support for PosiTector 6000 FHXS Xtreme™ probe |
| 4.00.06 | 29-Oct-2012 | -Support for 200 (ultrasonic coating thickness) probes |
| 3.01.05 | 08-Aug-2012 | Advanced models with serial numbers greater than 730,000 only |
| 3.01.04 | 17-July-2012 | -Initial Release (WiFi support) |
ADV Base (PosiTector Advanced models - Serial Numbers: 702,000 to 729,000)
| Revision | Release Date | Release Notes |
| 5.17.00 | 17-May-2016 | -Miscellaneous updates/fixes
|
| 5.16.00 | 03-May-2016 | -Miscellaneous updates/fixes
|
| 5.15.00 | 04-Jan-2016 | -Miscellaneous updates -Added wet bulb temperature to JSON file
|
| 5.14.00 | 01-Apr-2015 | -Added support for PosiTector RTR-P probe |
| 5.13.00 | 24-Feb-2015 | -Added support for PosiTector SPG-CS probe |
| 5.12.00 | 17-Feb-2015 | --Miscellaneous fixes/updates |
| 5.11.00 | 26-Jan-2015 | --Added support to display millimeter (mm) for PosiTector 6000 FT/FTS/FNTS probes |
| 5.10.00 | 26-Jan-2015 | --Added support for PosiTector 6000 FXS Xtreme™ probe |
| 5.08.00 | 29-May-2014 | Advanced models with serial numbers greater than 730,000 only: |
| 5.06.00 | 01-May-2014 | -Fixed issue where PosiTector may not be found in PosiSoft 3.0 & PosiSoft Mobile when connected via WiFi -Miscellaneous fixes/updates |
| 5.05.00 | 17-Mar-2014 | -Added support for PC (powder checker) probes -Miscellaneous fixes/updates |
| 5.01.00 | 19-Dec-2013 | New probe interchangeability features... -Hot Swap - change probes without powering down the instrument -Probe Settings Retention: PosiTector remembers the stored settings of each probe that was attached |
| 5.00.00 | 30-Oct-2013 | -Added support for RTR (replica tape reader) probes |
| 4.00.16 | 23-July-2013 | -Miscellaneous fixes/updates (UTG probes) |
| 4.00.14 | 10-July-2013 | -Miscellaneous fixes/updates (6000 probes) |
| 4.00.11 | 10-May-2013 | -Added support for 6000 FNGS probe -Fixed displayed range in Gage Info (200 probes only) -Miscellaneous fixes/updates |
| 4.00.09 | 07-Jan-2013 | -Miscellaneous fixes/updates |
| 4.00.08 | 12-Dec-2012 | -Support for PosiTector 6000 FHXS Xtreme™ probe |
| 4.00.06 | 29-Oct-2012 | -Support for 200 (ultrasonic coating thickness) probes |
| 3.01.05 | 08-Aug-2012 | Advanced models with serial numbers greater than 730,000 only |
| 3.00.04 | 01-June-2012 | -PosiTector DPM: Fixed Trend Chart display issue -Miscellaneous fixes/updates |
| 3.00.03 | 26-April-2012 | -UTG updates |
| 3.00.01 | 13-April-2012 | -Added support for UTG (ultrasonic thickness) probes -Added Screen Capture feature - compatible with all probes -Added memory summaries screen - compatible with all probes -Miscellaneous fixes/updates |
| 2.00.09 | 06-Mar-2012 | -Added Batch Annotation with on-screen QWERTY keyboard -Misc. updates and fixes for SSPC-PA2 (PosiTector 6000) and Smart Batch (PosiTector SPG) |
| 2.00.06 | 29-Dec-2011 | -PosiTector 6000: updated PA2 batch view, added axis labels to real-time chart -PosITector SPG: SmartBatch now opens correctly when no readings exist in a batch (empty batches) -Updated Dutch translations. |
| 2.00.05 | 30-Sept-2011 | -Added status and substrate data fields to the readings.txt file located within the PosiTector's USB Mass Storage drive. |
| 2.00.04 | 27-Sept-2011 | -Added support for SPG (surface profile) probes -Updated Spanish and Korean language translations |
| 2.00.03 | 09-Sept-2011 | -Added support for DPM (dew point meter) probes. -Improved power management to extend battery life -Enhanced USB Mass Storage - faster initialization of PosiTector virtual drive when plugged into computer. -Updated German, Chinese, Czech, French, Dutch, Norwegian, Japanese and Italian language translations -Updated help screens. -Miscellaneous fixes/updates |
| 1.00.52 | 04-Aug-2011 | -Resolved periodic delay while measuring in Fast Mode -Fixed: [Statistics Mode] A high value (9999) was erroneously displayed when using the (-) button to delete the last reading. -Fixed: Bluetooth Printing of non-latin characters -A probe disconnect icon will now display during power-up if a probe is not attached -Added Icon overview help screen -Miscellaneous fixes/updates |
| 1.00.51 | 27-May-2011 | -Enhanced button response -Included Italian language help support -Added Gage Serial Number to USB Mass storage index.html file |
| 1.00.50 | 10-May-2011 | -Multilanguage help support. Minor updates to IMO PSPC 90/10 mode. Miscellaneous fixes. |
| 1.00.49 | 05-May-2011 | -Updated menu translations for German, Chinese, Dutch, Spanish, Korean, Russian, Portuguese, Norwegian and Turkish. -Updated DeFelsko logo in USB Mass Storage Reports |
| 1.00.48 | 25-April-2011 | -Miscellaneous fixes/updates |
| 1.00.47 | 13-April-2011 | -Initial Release |
